How Are Speed Limits Set?

iStock
iStock

When driving down a road where speed limits are oppressively low, or high enough to let drivers get away with reckless behavior, it's easy to blame the government for getting it wrong. But you and your fellow drivers play a bigger a role in determining speed limits than you might think.

Before cities can come up with speed limit figures, they first need to look at how fast motorists drive down certain roads when there are no limitations. According to The Sacramento Bee, officials conduct speed surveys on two types of roads: arterial roads (typically four-lane highways) and collector streets (two-lane roads connecting residential areas to arterials). Once the data has been collected, they toss out the fastest 15 percent of drivers. The thinking is that this group is probably going faster than what's safe and isn't representative of the average driver. The sweet spot, according to the state, is the 85th percentile: Drivers in this group are thought to occupy the Goldilocks zone of safety and efficiency.

Officials use whatever speed falls in the 85th percentile to set limits for that street, but they do have some wiggle room. If the average speed is 33 mph, for example, they’d normally round up to 35 or down to 30 to reach the nearest 5-mph increment. Whether they decide to make the number higher or lower depends on other information they know about that area. If there’s a risky turn, they might decide to round down and keep drivers on the slow side.

A road’s crash rate also comes into play: If the number of collisions per million miles traveled for that stretch of road is higher than average, officials might lower the speed limit regardless of the 85th percentile rule. Roads that have a history of accidents might also warrant a special signal or sign to reinforce the new speed limit.

For other types of roads, setting speed limits is more of a cut-and-dry process. Streets that run through school zones, business districts, and residential areas are all assigned standard speed limits that are much lower than what drivers might hit if given free rein.

Have you got a Big Question you'd like us to answer? If so, let us know by emailing us at bigquestions@mentalfloss.com.

Why Are Elections Held on Tuesdays?

iStock/YinYang
iStock/YinYang

Ever wonder why Americans always vote in federal elections on Tuesdays? There are a few reasons—including a little something to do with the horse and buggy.

Between 1788 and 1845, states decided their own voting dates. In 2012, then-Historian of the Senate Don Ritchie told NPR that strategy resulted in chaos, a "crazy quilt of elections" held all across the country at different times to pick the electors—the white, male property owners who would cast their votes for president on the first Wednesday of December. In 1792, a law was passed mandating that state elections be held within a 34-day period before that day, so most elections took place in November. (Society was mostly agrarian; in November, the harvest was finished but winter hadn’t yet hit, making it the perfect time to vote.)

The glacial pace of presidential elections wasn't a huge issue in the late 18th and early 19th centuries—communication was slow, so results took weeks to announce anyway—but with the advent of the railroad and telegraph, Congress decided it was time to standardize a date. Monday was out, because it would require people to travel to the polls by buggy on the Sunday Sabbath. Wednesday was also not an option, because it was market day, and farmers wouldn’t be able to make it to the polls. So it was decided that Tuesday would be the day that Americans would vote in elections, and in 1845, Congress passed a law that presidential elections would be held on the Tuesday after the first Monday in November.

Have you got a Big Question you'd like us to answer? If so, let us know by emailing us at bigquestions@mentalfloss.com.

This article originally ran in 2012.

Does Sound Travel Faster or Slower in Space?

iStock/BlackJack3D
iStock/BlackJack3D

Viktor T. Toth:

It is often said that sound doesn’t travel in space. And it is true … in empty space. Sound is pressure waves, that is, propagating changes in pressure. In the absence of pressure, there can be no pressure waves, so there is no sound.

But space is is not completely empty and not completely devoid of pressure. Hence, it carries sound. But not in a manner that would match our everyday experience.

For instance, if you were to put a speaker in interstellar space, its membrane may be moving back and forth, but it would be exceedingly rare for it to hit even a single atom or molecule. Hence, it would fail to transfer any noticeable sound energy to the thin interstellar medium. Even the somewhat denser interplanetary medium is too rarefied for sound to transfer efficiently from human scale objects; this is why astronauts cannot yell to each other during spacewalks. And just as it is impossible to transfer normal sound energy to this medium, it will also not transmit it efficiently, since its atoms and molecules are too far apart, and they just don’t bounce into each other that often. Any “normal” sound is attenuated to nothingness.

However, if you were to make your speaker a million times bigger, and let its membrane move a million times more slowly, it would be able to transfer sound energy more efficiently even to that thin medium. And that energy would propagate in the form of (tiny) changes in the (already very tiny) pressure of the interstellar medium, i.e., it would be sound.

So yes, sound can travel in the intergalactic, interstellar, interplanetary medium, and very, very low frequency sound (many octaves below anything you could possibly hear) plays an important role in the formation of structures (galaxies, solar systems). In fact, this is the mechanism through which a contracting cloud of gas can shed its excess kinetic energy and turn into something compact, such as a star.

How fast do such sounds travel, you ask? Why, there is no set speed. The general rule is that for a so-called perfect fluid (a medium that is characterized by its density and pressure, but has no viscosity or stresses) the square of the speed of sound is the ratio of the medium’s pressure to its energy density. The speed of sound, therefore, can be anything between 0 (for a pressureless medium, which does not carry sound) to the speed of light divided by the square root of three (for a very hot, so-called ultrarelativistic gas).

This post originally appeared on Quora. Click here to view.

SECTIONS

arrow
LIVE SMARTER